Quality Greenhouse Humidifier — Wholesale from MistAirHome China Factory. Custom Branding Available.
Customer Service Hotline:
+8613261677119
Quality Greenhouse Humidifier — Wholesale from MistAirHome China Factory. Custom Branding Available.+8613261677119
TL;DR - The Mistairhome WL-AH05C (PRO) holds 225 mL and mists 32 mL per hour or 14.9 mL per hour, which is 7.0 hours and 15.1 hours per fill; the oil side takes 1.6 mL and runs 5.0 hours per fill at 0.32 mL per hour; it covers 11 sq m (123 sq ft) at a 2.6 m ceiling and measures 25.1 dB on the high step and 22.4 dB on the sleep step; it draws 1.9 W and takes its supply from USB-C 5V/1A, with a 12 V lighter adapter on the fleet build; felt pad in the lid, two to three drops, replaced when the scent changes; the humidistat holds target band 40 to 65 percent in 5 percent steps, held within 5 percent from the controls on the unit, with every setting stored on the unit, no voice path on this chassis; 900 mAh lithium polymer, giving 2.9 hours per charge on the low mist step; it weighs 175 g and measures 7.4 x 7.4 x 12.8 cm, and ships documented to CE / RoHS / FCC standards for import into South Korea. MOQ is 200 units per SKU with a 20-30-day lead time, FOB Shenzhen or EXW Longgang.
China Wanlin supplies the Aroma Humidifier BPA Free category as a direct manufacturer, not as a trading intermediary. The unit described below is one configuration out of 24 combinations (8 chassis x 3 SKU builds) that share a common misting family, a common oil path and a common documentation set, so a distributor can build a coherent shelf from one source rather than stitching together unrelated suppliers. Every unit referenced on this page corresponds to a specific bill of materials held on file, so the figures below can be reproduced or independently verified at sample stage.
The scent path is the part that separates this range from a humidifier with a few drops poured into the tank. The oil sits in its own tray or pad above the water line, on seals rated for citrus and resin blends, so the disc, the tank and the gasket never contact the oil. That is what keeps a scented unit serviceable for years rather than seasons, and it is the first thing we ask a buyer to check on a competitor sample.
Full specification of WL-AH05C-PRO:
| Misting method | Ultrasonic piezo micro-disc at 2.4 MHz with a baffled outlet aimed at the cabin |
| Tank capacity | 225 mL |
| Mist output on the high step | 32 mL per hour |
| Mist output on the low step | 14.9 mL per hour |
| Run time per fill on the high step | 7.0 hours |
| Run time per fill on the low step | 15.1 hours |
| Coverage area | 11 sq m (123 sq ft) at a 2.6 m ceiling |
| Noise at 1 m on the high step | 25.1 dB |
| Noise at 1 m on the sleep step | 22.4 dB |
| Scent delivery method | Felt pad in the lid, two to three drops, replaced when the scent changes |
| Oil tray capacity | 1.6 mL |
| Oil contact parts | Felt pad in a PP holder; the shell is UV-stabilised ABS for a dashboard |
| Scent intensity control | One output level, because a stronger scent in a closed cabin is unpleasant |
| Scent run time per tray fill | 5.0 hours |
| Oil use per hour | 0.32 mL per hour |
| Water type | Distilled or bottled; a small disc and a hot dashboard are a scaling combination |
| Mineral dust handling | Cartridge not fitted; bottled water keeps the disc alive through a summer |
| Fill method | Twist-off base filled at a tap, sealed before it goes back in the holder |
| Battery pack | 900 mAh lithium polymer |
| Cordless run time | Up to 2.9 hours per charge on the low mist step |
| Charge time | 2.5 hours from empty |
| Power input | USB-C 5V/1A, with a 12 V lighter adapter on the fleet build |
| Rated power on the high step | 1.9 W |
| Control interface | One button on the top face, long press for the light, no menu |
| Network link | no radio on this build, start and stop are on the unit |
| App platform | no app on this build, the unit is set once and left in the holder |
| Voice assistant support | no voice assistant in a vehicle build |
| Humidistat range and accuracy | target band 40 to 65 percent in 5 percent steps, held within 5 percent |
| Scheduling | Two or four hour run timer with an auto stop when the disc runs dry |
| Night light | Single warm dot, and it can be switched off entirely for night driving |
| Protection | Dry-run shut-off, tilt switch, sealed cap, cell overcharge cut-out |
| Dimensions | 7.4 x 7.4 x 12.8 cm |
| Weight | 175 g |
| Warranty | 12 months |
| Shipped kit | Pro build, + spare misting disc + demineralisation cartridge + 5 oil pads + multilingual manual |
| Units per master carton | 100 |
| Lead time | 20-30 days |
The strongest pull in South Korea now comes from hospitality, retail and facilities buyers rather than households, because they can put a number on complaints, on dwell time and on room-turn minutes, which makes the decision easy to defend internally. Two routes dominate access. The traditional route is importer to distributor to retail; the faster one is the cross-border seller who buys direct, preps for the marketplace and skips two margin layers.
Distributors handling Aroma Humidifier BPA Free lines consistently find that the repeat revenue sits in the consumable, in cartridges, pads and replacement discs, and increasingly in the oil itself, rather than in the appliance. This is why the table above states figures by model rather than by marketing tier: a buyer comparing two SKUs needs the noise on the sleep step, the run time per fill and the oil handling side by side, because those three predict both satisfaction and return rates better than any other set.
Wanlin serves South Korea through three programmes that suit different balance sheets. New partners start with sample evaluation then a mixed trial order. Established distributors move to scheduled container shipments with locked pricing windows. Brand owners run private-label programmes with their own artwork and manuals. In all three cases the factory documentation, including the certificates and oil declarations listed further down this page, references the specific model code on the order rather than a generic family certificate, which is the most common cause of customs delay in this category. On the WL-AH05C (PRO) the figures worth carrying into the next order are the 225 mL tank, the 5.0 hours of scent per oil fill, and the 22.4 dB reading on the sleep step.
The decision that matters most in this category is not output, it is what the unit does with dissolved minerals, and it is the one most often sold badly. An ultrasonic disc atomises water, and with it everything dissolved in that water, so on a hard supply the minerals become airborne and settle as a fine white film on whatever is nearby. Two answers exist and we build both: a demineralisation cartridge in the tank, which is a consumable with a real working life, or a scented build run on distilled water in markets where the supply is known to be hard.
The second decision is the cleaning path, which is an engineering decision long before it is a marketing one. Standing water at room temperature grows biofilm, and a tank with oil residue in it grows it faster, so the honest interval is every five to seven days in continuous use and every three to four days where a scent is run daily. A tank a hand cannot reach into is a tank that never gets cleaned properly, which is why the openings on this range are sized for a hand and a brush rather than for a photograph.
The third is the control loop. A fixed mist step ignores the room entirely, so a sealed room overshoots while a draughty one never arrives, and a scented room that overshoots is a room that smells wrong. A humidistat with a stated target band, fed by a sensor calibrated at the factory and re-checkable by the buyer with an ordinary hygrometer, is the difference between a product that holds a number and one that merely runs. The WL-AH05C (PRO) packs 100 units to a carton, carries 12 months of warranty cover and a 20-30-day stated lead time, and draws 1.9 W on the high step.
Three deployment records from the Aroma Humidifier BPA Free programme, each with the conditions that shaped it. Site detail is kept because it is the part that transfers: the water, the ceiling, the rota and the complaint are what decide whether a unit stays in service, and none of them appear on a specification sheet.
Deployment: A new-build apartment block on the Öresund coast, 84 units, exposed to westerly wind off the water
Timing: One heating season from October 2025
Wind is the variable that never appears in a sizing table. Apartments on the seaward side ran through a tank roughly 30 percent faster than identical units on the courtyard side, which the facilities manager discovered by comparing two log sheets. The second order put larger tanks on the windward stack and left the courtyard units alone. It is a small correction worth perhaps a litre per week per unit, and it stopped the complaints from the eleven flats that had been running dry overnight.
Deployment: A pre-war flats estate, units with original louvre windows and air conditioning in every bedroom
Timing: One year from March 2025
Singapore is humid outdoors and dry indoors, and a buyer who quotes the outdoor figure gets the wrong product. Inside an air-conditioned bedroom here the reading is regularly below 40 percent. The apartments in this estate are small and the bedrooms smaller, so a compact chassis with a night schedule was the whole order. The louvre windows are the detail that matters: they leak, which means the room never quite holds a target, and a closed-loop unit is wasted money in a room like that.
Deployment: A weatherboard house on a hill suburb, windy, heated by a heat pump, three bedrooms
Timing: One heating season from May 2025
Wind and a heat pump together dry a weatherboard house faster than the floor area suggests, and the house here has a corridor that ducts air between the bedrooms. One unit per bedroom with a night schedule was the answer, rather than one large unit in the hall, which is what the household first bought and returned. The second order came with a note that the children's rooms now run the scent step and the main bedroom does not.
The pattern across all three is that the deciding factor was never peak output. It was whether the tank lasted a full shift, whether the oil could be refilled inside the round, and whether anyone complained about the smell or the dust. Those are the questions we ask before quoting. The WL-AH05C (PRO) packs 100 units to a carton, carries 12 months of warranty cover and a 20-30-day stated lead time, and draws 1.9 W on the high step.
Four placement patterns cover most of the enquiries we see for this category. The useful observation is that each one is answered by configuration and placement rather than by buying a larger unit, which is the default reflex and usually the wrong one.
| Scenario | Room or site | What the site needs | What the unit does |
| SC06-GUESTROOM | Turned around inside a fixed housekeeping window, twelve rooms to a round | A fill and a scent refresh inside the minutes the room already gets | Top fill from a jug at the bedside and a tray filled without removing the lid, so both tasks sit inside the existing round rather than adding to it. |
| SC01-BEDTIME | Master bedrooms where the scent is part of the wind-down routine | A scent that fades before the sleeper notices it, and a tank that lasts the night | A scheduled step-down holds output low overnight, the light goes fully dark, and the tray runs out of oil around the time the sleeper does. |
| SC07-CABIN | Parked vehicles that sit in the sun, where heat and smell arrive together | A sealed lid and a scent mild enough for a closed cabin | A cup-holder chassis with a sealed base runs on the vehicle supply, one scent level only, and stops when the disc runs dry. |
| SC02-NURSERY | Rooms shared with a sleeping child, where light and smell both have to be quiet | An unscented night step and a light that switches fully off | The mist runs on the low step with the tray left empty, and the display and the ring both switch off, so the room is humidified without being scented or lit. |
Two of these four are decided before the unit is switched on: whether the tank lasts the interval the site can actually service, and whether the scent level is one the room will accept. For this configuration that means 14.9 mL per hour at 22.4 dB, holding 15.1 hours per fill and 5.0 hours of scent across an 11 sq m (123 sq ft) room.
Buying direct changes three things that no catalogue can show. The first is the bill of materials. A trading company quotes a price; a factory can tell you which disc, which seal and which tray is inside the unit, and what each of them costs to replace. That matters more here than in most categories, because the parts that wear are the parts that meet the oil, and they are the parts that decide whether the product is still in service in March.
The second is what happens when something goes wrong at the destination. A defect that traces to a single component is a component we stock, and it rides in the next container at the cost of the part rather than at the cost of a replacement unit. A distributor who cannot supply a seal or a pad loses the next appliance order along with the goodwill.
The third is the ability to say no. We will decline an ultrasonic build for a hard-water market without the cartridge, and we will decline a resin-heavy oil programme on a chassis with standard silicone seals, because both configurations produce a return rate rather than a reorder. A factory that can change the build is the only kind of supplier that can give that answer honestly. The WL-AH05C (PRO) packs 100 units to a carton, carries 12 months of warranty cover and a 20-30-day stated lead time, and draws 1.9 W on the high step.
Market access for this product is mostly a documentation exercise, and the mapping is stable. Europe wants the CE technical file, an EMC report and IEC 60335-1. North America adds FCC documentation for the digitally controlled models. Japan and Korea issue against PSE and KC, Australia and New Zealand against RCM, and all four want the certificates to name the model being shipped.
The second thing worth knowing is what a certificate does not cover. It does not cover the scent, and a hospitality or childcare buyer will ask about the oil before it asks about EMC. We hold the IFRA statement, the allergen declaration and the MSDS per blend, plus a flash point figure for the transport classification, and those four are the documents that most often decide a hotel or clinic order.
The third is the battery and oil overlay together. Where a cell is fitted and an oil set ships in the retail box, both sit on top of the appliance documentation and each adds a step at freight booking. For a buyer shipping to several markets at once, the cheapest route is to declare the full destination list and the full oil list at quotation stage so the documentation is raised once, in one package, rather than market by market as each order lands. For this configuration that means 14.9 mL per hour at 22.4 dB, holding 15.1 hours per fill and 5.0 hours of scent across an 11 sq m (123 sq ft) room.
Three numbers decide whether this line works for a distributor, and the first one is not the unit price. Freight is the variable most buyers undercount: at 0.089 cubic metres per master carton of 100 units, a 20 ft container takes about 237 cartons, or roughly 23,700 units, and a 40 ft container about 523 cartons, or roughly 52,300 units. Those are volume figures before palletisation and loading losses, so a buyer should treat them as an upper bound.
The second number is the consumable. A misting disc is a wearing part with a service life measured in months of continuous use rather than years, and hard water shortens it considerably. Pads and cartridges sit on top of that, and where the programme ships oil, the oil is the fastest-moving line of the three. We suggest one spare disc per twenty units, one cartridge per unit where the water is hard, and a pad set per unit per year, and all of them ride in the same container as the appliances.
The third is the cost of a return. In this category returns split roughly evenly between mineral dust and a scent the room did not want, and both are prevented at specification stage rather than by a better returns process. For this configuration that means 14.9 mL per hour at 22.4 dB, holding 15.1 hours per fill and 5.0 hours of scent across an 11 sq m (123 sq ft) room.
What is the minimum order quantity for a first aroma humidifier order?
MOQ is 200 units per SKU for standard builds and 300 units for custom colour or private-label packaging. Mixed-container orders combining several models are accepted as long as each individual SKU clears its own minimum. The specification table on this page shows the exact build we ship for WL-AH05C-PRO.
Can essential oil go in the water tank, or does it have its own tray?
It has its own tray, and that is the point of the design. The oil sits above the water line on felt pad in a pp holder; the shell is uv-stabilised abs for a dashboard, so the disc, the tank and the gasket never contact it. Pouring oil into the tank is the common construction and it is the reason cheap units fail in the second season: the oil films the disc and swells the seal. On WL-AH05C the tray is 1.6 mL and lifts out for washing.
Does this humidifier leave white mineral dust on furniture?
It depends on the water and on the misting method, and it is the single largest cause of returns in this category. An ultrasonic disc throws everything dissolved in the water into the air, so on a hard supply it leaves a fine white mineral film on dark surfaces within days. The answer is a demineralisation cartridge in the tank, which is a consumable with a real working life. This unit is specified as cartridge not fitted; bottled water keeps the disc alive through a summer.
Which compliance and oil documents ship with an aroma humidifier order?
The standard appliance file set is the CE technical file, RoHS and REACH declarations, an EMC test report and the IEC 60335-1 household appliance safety report, plus a UN38.3 test report with an IEC 62133 cell report and MSDS on any build carrying a cell. Where oil ships with the unit we add an IFRA-aligned statement of conformity, an allergen declaration, an MSDS per blend and a flash point figure for transport classification. Certificates are issued against WL-AH05C, the model code on the order, rather than against a generic family.
Can we sell these under our own brand, with our own packaging?
Yes. Private label covers housing colour, logo placement, retail artwork, manual language, the accessory kit and, on the Plus build, the oil set itself. Most of it sits inside existing tooling for this range, so customisation does not mean re-engineering. The decision we ask buyers to make early is which consumables travel with the appliance, because a unit sold without a cartridge into a hard-water market generates complaints that no artwork will fix.
How much oil does a unit use, and how often does the tray need filling?
Published per model rather than left to guesswork. This unit holds 1.6 mL in the tray and uses 0.32 mL per hour on the step quoted, which works out at 5.0 hours of scent per fill. In a bedroom that is several nights per fill on the low step; in a reception area running all day it is a midweek top-up, and the one output level, because a stronger scent in a closed cabin is unpleasant let the site set how much of that dose the room actually gets.
What warranty and spares support do you provide?
12 months against manufacturing defect on WL-AH05C. Misting discs, pads, cartridges, trays and seals are stocked as separate line items and can ride in the same container as the units, which is the cheapest way to buy them. We suggest one spare disc per twenty units and one cartridge per unit where the water is hard, plus a pad set per unit per year on scented programmes. On South Korea shipments the parts travel inside the same container as the appliances, which avoids a second freight booking and the paperwork that comes with it.
How long does sampling and first production take?
Samples ship in 5 to 7 working days from an existing specification, or 15 to 20 days if a custom colour is required. First production runs in 20-30 days depending on SKU and quantity, measured from order confirmation and deposit, with the exact figure stated on the proforma invoice rather than left open. Where an oil set ships inside the retail box, the transport classification adds a step at booking.
This is a programme for buyers who intend to reorder. The first order is rarely the profitable one for either side; what makes it worthwhile is a range that can be relisted next season without a new test round, a spares line that keeps customers, and a consumable that brings them back.
It suits distributors building an air-treatment or home-fragrance shelf, brand owners who want a chassis they can put their own artwork on, gift and fragrance companies planning an oil line alongside the appliance, hospitality groups standardising across several properties, and cross-border sellers who need prep done before the container moves.
It suits less well anyone whose only criterion is the lowest unit price, because the price difference between a well-built unit and the cheapest one on the market is smaller than the cost of the returns it prevents, and in this category the returns arrive as swollen seals and filmed discs rather than as dead appliances. The WL-AH05C (PRO) packs 100 units to a carton, carries 12 months of warranty cover and a 20-30-day stated lead time, and draws 1.9 W on the high step.
The cleanest first orders we see share one habit: the buyer declares the destination list and the oil list at quotation stage. Certificates, manuals, plugs and transport classification all follow from those two lists, and raising them once as a package costs far less than raising them market by market as each order lands.
After that the sequence is ordinary. Sample evaluation first, on the actual specification rather than a similar one, with the buyer measuring mist output by a weighed run, run time per fill at the low step, oil use over a known number of hours, and noise at one metre in a quiet room. Then the proforma invoice, which carries the stated lead time and the packing list rather than leaving them open. Then production, then booking.
The one step buyers skip and regret is the spares decision. Adding a spare disc per twenty units, a cartridge per unit where the water is hard and a pad set per unit per year costs almost nothing on a first container and prevents the top-up shipment that otherwise arrives in the middle of the season. On the WL-AH05C (PRO) the figures worth carrying into the next order are the 225 mL tank, the 5.0 hours of scent per oil fill, and the 22.4 dB reading on the sleep step.
If there is one thing to take from this page, it is that the oil path and the water answer are the two that decide the return rate, and both can be checked before an order is placed. Lift the tray on a sample and look at what the oil touches, and put the unit on the water it will actually be sold with.
Everything else - output, coverage, run time, oil use, documentation - is measurable and published here so it can be verified rather than taken on trust. Where the answer depends on the room we say so rather than quoting a number that only holds in a laboratory.
Wanlin supplies this range as a manufacturer and is open to partnership with distributors, brand owners, fragrance and gift companies, hospitality and facilities buyers, cross-border sellers and export traders. Samples, specification sheets and certificates are available on request. On the WL-AH05C (PRO) the figures worth carrying into the next order are the 225 mL tank, the 5.0 hours of scent per oil fill, and the 22.4 dB reading on the sleep step.
Published by: Wanlin Manufacturing Group, MistAirHome Export Division
Published on: September 30, 2026
Data sources: in-house factory testing + misting disc and oil tray specifications + certification and oil declaration files + partner deployment records
Company address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
References: factory quality manual + third-party test reports + customer shipment records
Contact: Mistairhome@163.com / +8613261677119 / https://www.mistairhome.com
