Quality Greenhouse Humidifier — Wholesale from MistAirHome China Factory. Custom Branding Available.
Customer Service Hotline:
+8613261677119
Quality Greenhouse Humidifier — Wholesale from MistAirHome China Factory. Custom Branding Available.+8613261677119
TL;DR - The Mistairhome WL-AH07F (PRO) holds 425 mL and mists 52 mL per hour or 23.9 mL per hour, which is 8.2 hours and 17.8 hours per fill; the oil side takes 4.1 mL and runs 12.8 hours per fill at 0.32 mL per hour; it covers 19 sq m (200 sq ft) at a 2.6 m ceiling and measures 24.1 dB on the high step and 21.4 dB on the sleep step; it draws 3.1 W and takes its supply from USB-C 5V/2A or the supplied mains adapter; oil tray under the lid, scented water is never used in the tank; the humidistat holds target band 30 to 75 percent in 5 percent steps, held within 3 percent over Wi-Fi 2.4 GHz with Bluetooth fallback for first pairing, and light programmes and scent schedules stored as scenes, one tap each, voice runs through Amazon Alexa and Google Home for scenes that pair light with mist; no internal cell on this build; it weighs 482 g and measures 14.0 x 14.0 x 21.8 cm, and ships documented to CE / RoHS / FCC standards for import into Thailand. MOQ is 200 units per SKU with a 20-30-day lead time, FOB Shenzhen or EXW Longgang.
China Wanlin supplies the Essential Oil Humidifier with LED Light category as a direct manufacturer, not as a trading intermediary. The unit described below is one configuration out of 24 combinations (8 chassis x 3 SKU builds) that share a common misting family, a common oil path and a common documentation set, so a distributor can build a coherent shelf from one source rather than stitching together unrelated suppliers. Every unit referenced on this page corresponds to a specific bill of materials held on file, so the figures below can be reproduced or independently verified at sample stage.
The scent path is the part that separates this range from a humidifier with a few drops poured into the tank. The oil sits in its own tray or pad above the water line, on seals rated for citrus and resin blends, so the disc, the tank and the gasket never contact the oil. That is what keeps a scented unit serviceable for years rather than seasons, and it is the first thing we ask a buyer to check on a competitor sample.
Full specification of WL-AH07F-PRO:
| Misting method | Ultrasonic piezo disc at 2.4 MHz inside a frosted shell lit by a flame-effect LED bank |
| Tank capacity | 425 mL |
| Mist output on the high step | 52 mL per hour |
| Mist output on the low step | 23.9 mL per hour |
| Run time per fill on the high step | 8.2 hours |
| Run time per fill on the low step | 17.8 hours |
| Coverage area | 19 sq m (200 sq ft) at a 2.6 m ceiling |
| Noise at 1 m on the high step | 24.1 dB |
| Noise at 1 m on the sleep step | 21.4 dB |
| Scent delivery method | Oil tray under the lid, scented water is never used in the tank |
| Oil tray capacity | 4.1 mL |
| Oil contact parts | PP tray with a silicone seal, and the shell is PC rather than ABS for clarity |
| Scent intensity control | Three intensity steps, and the light can run with the scent switched off |
| Scent run time per tray fill | 12.8 hours |
| Oil use per hour | 0.32 mL per hour |
| Water type | Tap or distilled; the shell hides the water line, so the level window is on the back |
| Mineral dust handling | Cartridge optional, drops into the filler neck |
| Fill method | Top fill with a removable lid and a wide brush opening |
| Battery pack | Not fitted, runs from the USB-C supply |
| Cordless run time | Not applicable, mains or USB powered |
| Charge time | Not applicable, no internal cell |
| Power input | USB-C 5V/2A or the supplied mains adapter |
| Rated power on the high step | 3.1 W |
| Control interface | Touch ring with three mist steps, light mode and a scent step |
| Network link | Wi-Fi 2.4 GHz with Bluetooth fallback for first pairing |
| App platform | light programmes and scent schedules stored as scenes, one tap each |
| Voice assistant support | Amazon Alexa and Google Home for scenes that pair light with mist |
| Humidistat range and accuracy | target band 30 to 75 percent in 5 percent steps, held within 3 percent |
| Scheduling | Seven day schedule with four events per day and a bedtime scene |
| Night light | Flame, volcano and rain-cloud light programmes plus seven fixed colours |
| Protection | Dry-run shut-off, tilt switch, overheat cut-out on the LED bank, overcurrent limit |
| Dimensions | 14.0 x 14.0 x 21.8 cm |
| Weight | 482 g |
| Warranty | 18 months |
| Shipped kit | Pro build, + spare misting disc + demineralisation cartridge + 5 oil pads + multilingual manual |
| Units per master carton | 30 |
| Lead time | 20-30 days |
The strongest pull in Thailand now comes from hospitality, retail and facilities buyers rather than households, because they can put a number on complaints, on dwell time and on room-turn minutes, which makes the decision easy to defend internally. Channel structure follows a stable pattern: importers take container volumes, regional distributors break bulk into pharmacy, hospitality and gift supply, and online sellers absorb the mixed-SKU remainder that suits catalogue breadth.
For the Essential Oil Humidifier with LED Light segment the deciding specifications are whether the oil stays out of the water path, whether the scent step can be turned down far enough for a shared room, and what the unit does with dissolved minerals. Peak mist volume ranks below all three, which surprises first-time buyers. This is why the table above states figures by model rather than by marketing tier: a buyer comparing two SKUs needs the noise on the sleep step, the run time per fill and the oil handling side by side, because those three predict both satisfaction and return rates better than any other set.
Wanlin serves Thailand through three programmes that suit different balance sheets. New partners start with sample evaluation then a mixed trial order. Established distributors move to scheduled container shipments with locked pricing windows. Brand owners run private-label programmes with their own artwork and manuals. In all three cases the factory documentation, including the certificates and oil declarations listed further down this page, references the specific model code on the order rather than a generic family certificate, which is the most common cause of customs delay in this category. On the WL-AH07F (PRO) the figures worth carrying into the next order are the 425 mL tank, the 12.8 hours of scent per oil fill, and the 21.4 dB reading on the sleep step.
Three numbers decide whether this category works in a room, and only one of them appears on most specification sheets. The first is millilitres per hour, quoted for both steps so a buyer can divide it into the tank capacity and know how long a fill lasts before ordering a single unit. The second is hours per fill, which is the number that decides whether a unit needs filling every night or every second night - and therefore whether it survives its first season in a household.
The third is the oil side, and it is the one nobody quotes. Scent is consumed at a rate, not by a setting, and across this range that rate sits between roughly 0.22 and 0.35 mL per hour depending on the step and the disc. Divide the tray capacity by that rate and a buyer knows how many nights a fill of oil lasts, which is the figure that decides whether the product is a pleasure or a chore. Ours is published per model and per step.
Every production batch is sampled for four things before release: mist output against the declared figure by weighed run, the decibel reading at one metre on both steps, oil tray seal integrity after a 72 hour soak in a citrus blend, and dry-run shut-off function on an empty tank. For this configuration that means 23.9 mL per hour at 21.4 dB, holding 17.8 hours per fill and 12.8 hours of scent across a 19 sq m (200 sq ft) room.
Three deployment records from the Essential Oil Humidifier with LED Light programme, each with the conditions that shaped it. Site detail is kept because it is the part that transfers: the water, the ceiling, the rota and the complaint are what decide whether a unit stays in service, and none of them appear on a specification sheet.
Deployment: A harbour-side coworking building with 120 desks and a café on the ground floor
Timing: Eleven months from January 2025
The café and the desks share a ceiling void, and the smell of coffee is the building's identity - so the scent programme here was subtractive. Units on the desk floors run water only; the café runs its own. A consultant who had proposed a signature scent across the whole building was, correctly, overruled by the operator, and we said so at quotation stage rather than selling more units. The order was smaller as a result and has reordered twice.
Deployment: A guesthouse with 16 rooms, burning season from February to April, smoke haze measured daily
Timing: Two burning seasons from February 2025
The honest answer to haze is filtration, and we said so at quotation stage, which cost us the larger part of the order and earned the rest. What the guesthouse bought was humidification for throat comfort in sealed rooms and a scent that made the rooms feel clean on arrival, with a purifier standing next to it doing the actual particulate work. The operator's review scores went up because of the purifier; the humidifier is what guests mention, because it is the thing they can smell and hear.
Deployment: A sleep clinic with eight overnight study rooms and a waiting area on the same air handling unit
Timing: Nine months from March 2025
The clinic's constraint was not the mist, it was the smell. A scented waiting area is pleasant and a scented study room is a confound, because odour changes how people fall asleep. The answer was a tray that can be left empty: the waiting area runs lavender on the low step all day, the eight study rooms run plain water with the tray dry, and the polysomnography microphones, which pick up anything above roughly 30 dB, never hear the difference. The sleep-step figure won the order; the empty-tray option is what kept it.
The pattern across all three is that the deciding factor was never peak output. It was whether the tank lasted a full shift, whether the oil could be refilled inside the round, and whether anyone complained about the smell or the dust. Those are the questions we ask before quoting. The WL-AH07F (PRO) packs 30 units to a carton, carries 18 months of warranty cover and a 20-30-day stated lead time, and draws 3.1 W on the high step.
Four placement patterns cover most of the enquiries we see for this category. The useful observation is that each one is answered by configuration and placement rather than by buying a larger unit, which is the default reflex and usually the wrong one.
| Scenario | Room or site | What the site needs | What the unit does |
| SC08-SHOPFLOOR | Retail floors where the scent is part of how the brand is remembered | One scent across the floor, present at the door and not at the till | Two output levels by zone, with the entrance pair on a higher scent step than the interior, because the dose that works at a doorway is too much ten metres in. |
| SC03-WORKDESK | A single workstation with a laptop, a phone and a shared air supply | Moisture at the desk, and no smell a neighbour can object to | A compact chassis on the low step, placed upwind of the face rather than beside the keyboard, with the scent step left off in shared space. |
| SC09-HALL | Open-plan lobbies with a ceiling well above a residential one | Output sized against volume, with a target rather than a step | A large-tank chassis holds a measured target and stops when the room arrives, which is the only way a tall space is controlled rather than merely filled. |
| SC04-RECEPTION | Entrance desks and waiting areas judged in the first ten seconds | A consistent first impression that does not depend on who is on shift | A burst mode runs the scent for thirty minutes either side of opening, then drops to a maintenance step nobody has to remember. |
Two of these four are decided before the unit is switched on: whether the tank lasts the interval the site can actually service, and whether the scent level is one the room will accept. For this configuration that means 23.9 mL per hour at 21.4 dB, holding 17.8 hours per fill and 12.8 hours of scent across a 19 sq m (200 sq ft) room.
Three costs dominate ownership of this product and only one of them is on the invoice. The first is the appliance. The second is the consumable - cartridges, pads, replacement discs and, on many programmes, the oil itself - which is where the repeat revenue sits for every distributor we work with and which should be planned as a line item rather than bought occasionally. The third is staff time, because a tank that cannot be cleaned quickly is a tank that does not get cleaned.
A factory programme attacks all three. Consumables ship in the same container as the appliances, which is the cheapest way to buy them. Cleaning intervals are published rather than left to guesswork, and the tank geometry is chosen so the published interval is actually achievable by one person on a round.
What we do not offer is the lowest unit price in the market. A cheaper unit in this category usually buys a narrower tank neck, a disc of unspecified origin, seals that swell on contact with citrus oil and no spares path, and every one of those shows up later as a cost somewhere else. For this configuration that means 23.9 mL per hour at 21.4 dB, holding 17.8 hours per fill and 12.8 hours of scent across a 19 sq m (200 sq ft) room.
Compliance in this category splits into three burdens that buyers often treat as one. The first is electrical and appliance safety: the CE technical file, an EMC test report and the IEC 60335-1 household appliance safety report, which is the set that gets a unit onto a shelf in Europe. The second applies only where a cell is fitted: a UN38.3 test report with an IEC 62133 cell report and an MSDS, which is the set that gets a unit onto a vessel.
The third is the oil, and it is the one that catches importers out. Where we ship oil with the unit we provide an IFRA-aligned statement of conformity, an allergen declaration listing the 26 declarable substances where they are present, an MSDS per blend and a flash point figure. That last number decides how the consignment is classified for transport: a blend below 60 C ships as a UN1266 Class 3 flammable liquid with the corresponding documentation and packaging, and a buyer who discovers this at the booking desk discovers it too late.
RoHS and REACH declarations cover the appliance materials, and because the oil contacts specific parts we also issue a material declaration for the tray, the seal and the pad rather than for the unit as a whole. Where a market needs a local approval, we issue against PSE, KC or RCM at the same time as the CE work rather than after it, because the test evidence largely overlaps. On the WL-AH07F (PRO) the figures worth carrying into the next order are the 425 mL tank, the 12.8 hours of scent per oil fill, and the 21.4 dB reading on the sleep step.
The economics of this line are an annuity, not a one-off sale, and buyers who plan it that way outperform the ones who do not. The appliance is the entry; the cartridge, the pad, the replacement disc and, on most programmes, the oil are the repeat, and in the pharmacy, gift and hospitality channels the consumable revenue overtakes the appliance revenue within the first year.
Freight is the part that needs doing carefully. At 0.163 cubic metres per carton of 30 units, a 40 ft container carries roughly 8,580 units by volume, and a 20 ft about 3,900. Those are upper bounds before pallet and loading losses, and the honest planning figure is a little below them.
What we suggest to a first-time buyer is deliberately unglamorous: a mixed trial order across two or three SKUs, spares at one disc per twenty units, a stated lead time of 20-30 days written on the proforma invoice, and a re-order point set by sell-through rather than by calendar. On the WL-AH07F (PRO) the figures worth carrying into the next order are the 425 mL tank, the 12.8 hours of scent per oil fill, and the 21.4 dB reading on the sleep step.
What is the minimum order quantity for a first aroma humidifier order?
MOQ is 200 units per SKU for standard builds and 300 units for custom colour or private-label packaging. Mixed-container orders combining several models are accepted as long as each individual SKU clears its own minimum. The specification table on this page shows the exact build we ship for WL-AH07F-PRO.
Can essential oil go in the water tank, or does it have its own tray?
It has its own tray, and that is the point of the design. The oil sits above the water line on pp tray with a silicone seal, and the shell is pc rather than abs for clarity, so the disc, the tank and the gasket never contact it. Pouring oil into the tank is the common construction and it is the reason cheap units fail in the second season: the oil films the disc and swells the seal. On WL-AH07F the tray is 4.1 mL and lifts out for washing.
Does this humidifier leave white mineral dust on furniture?
It depends on the water and on the misting method, and it is the single largest cause of returns in this category. An ultrasonic disc throws everything dissolved in the water into the air, so on a hard supply it leaves a fine white mineral film on dark surfaces within days. The answer is a demineralisation cartridge in the tank, which is a consumable with a real working life. This unit is specified as cartridge optional, drops into the filler neck.
Which compliance and oil documents ship with an aroma humidifier order?
The standard appliance file set is the CE technical file, RoHS and REACH declarations, an EMC test report and the IEC 60335-1 household appliance safety report, plus a UN38.3 test report with an IEC 62133 cell report and MSDS on any build carrying a cell. Where oil ships with the unit we add an IFRA-aligned statement of conformity, an allergen declaration, an MSDS per blend and a flash point figure for transport classification. Certificates are issued against WL-AH07F, the model code on the order, rather than against a generic family.
Can we sell these under our own brand, with our own packaging?
Yes. Private label covers housing colour, logo placement, retail artwork, manual language, the accessory kit and, on the Plus build, the oil set itself. Most of it sits inside existing tooling for this range, so customisation does not mean re-engineering. The decision we ask buyers to make early is which consumables travel with the appliance, because a unit sold without a cartridge into a hard-water market generates complaints that no artwork will fix.
How much oil does a unit use, and how often does the tray need filling?
Published per model rather than left to guesswork. This unit holds 4.1 mL in the tray and uses 0.32 mL per hour on the step quoted, which works out at 12.8 hours of scent per fill. In a bedroom that is several nights per fill on the low step; in a reception area running all day it is a midweek top-up, and the three intensity steps, and the light can run with the scent switched off let the site set how much of that dose the room actually gets.
What warranty and spares support do you provide?
18 months against manufacturing defect on WL-AH07F. Misting discs, pads, cartridges, trays and seals are stocked as separate line items and can ride in the same container as the units, which is the cheapest way to buy them. We suggest one spare disc per twenty units and one cartridge per unit where the water is hard, plus a pad set per unit per year on scented programmes. On Thailand shipments the parts travel inside the same container as the appliances, which avoids a second freight booking and the paperwork that comes with it.
How long does sampling and first production take?
Samples ship in 5 to 7 working days from an existing specification, or 15 to 20 days if a custom colour is required. First production runs in 20-30 days depending on SKU and quantity, measured from order confirmation and deposit, with the exact figure stated on the proforma invoice rather than left open. Where an oil set ships inside the retail box, the transport classification adds a step at booking.
The programme suits any buyer who has to answer for the product after it is sold, which in practice means everyone except the pure spot trader. A distributor carrying a range needs to know which chassis to put in front of which customer, and the answer is usually decided by water hardness, by who refills the tank, and by how much scent the room will accept.
Hospitality buyers need a fill interval that fits a housekeeping round. Clinical and childcare buyers need a material declaration for every oil contact part and a light that can be turned fully off. Retail and fragrance buyers need a tray they can demonstrate in front of a customer in under a minute. Facilities buyers need one unit per occupied room rather than one per floor, and they need the reasoning written down so it survives staff turnover.
What all of them have in common is that they are specifying against a room and a routine rather than against a specification sheet, which is why we ask about the site before we quote the unit. For this configuration that means 23.9 mL per hour at 21.4 dB, holding 17.8 hours per fill and 12.8 hours of scent across a 19 sq m (200 sq ft) room.
A first order runs in five steps and none of them need to be slow. The first is the specification: which chassis, which SKU build, and which markets, because the market list decides the documentation. The second is sampling, 5 to 7 working days from an existing specification or 15 to 20 if a custom colour is required.
The third is the paperwork - certificates, manuals, artwork, the battery files where a cell is fitted and the oil declarations where oil ships - and it runs in parallel with the second rather than after it, which is where most of the time is either saved or lost. The fourth is production, measured from order confirmation and deposit. The fifth is booking, which is where a battery build or an oil set needs its extra few days.
What we ask a buyer to decide before step one is which consumables and which oil travel with the appliances, because that choice affects the packing list, the freight classification and the lead time, and changing it later costs a second shipment. The WL-AH07F (PRO) packs 30 units to a carton, carries 18 months of warranty cover and a 20-30-day stated lead time, and draws 3.1 W on the high step.
Two things decide whether this product works, and neither is on the box: whether the tank lasts the interval the site can actually service, and whether the scent level is one the room will accept. Get those two right and the rest of the specification rarely matters.
Everything else on this page exists to make those two decisions possible before money moves - the figures by model rather than by marketing tier, the measurement conditions stated next to the decibel, the oil rate stated per hour, and the honest statement of where the answer depends on the room.
Enquiries are welcome from anyone supplying this category at volume, whether as an importer, a distributor, a brand owner, a fragrance or gift company, a facilities or hospitality group, or a cross-border seller. Samples and the full documentation set are available on request. The WL-AH07F (PRO) packs 30 units to a carton, carries 18 months of warranty cover and a 20-30-day stated lead time, and draws 3.1 W on the high step.
Published by: Wanlin Manufacturing Group, MistAirHome Export Division
Published on: September 30, 2026
Data sources: in-house factory testing + misting disc and oil tray specifications + certification and oil declaration files + partner deployment records
Company address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
References: factory quality manual + third-party test reports + customer shipment records
Contact: Mistairhome@163.com / +8613261677119 / https://www.mistairhome.com
